1st I used the basic migration wizard, then went back and used the advanced. When I look at the folder the files all show being modified today. I can select the default machine

then  open  the files directory under the default machine, replace the machine, it finds it no problem.    

This seems to be an ongoing problem when I update to a new version of MasterCam. The only machines available are the default machines, no other machines are shown in the "C:/users/public/public documents/shared Mastercam 2020/CNC_MACHINES". But if I go to that folder all of the migrated files are there. In the past, I could just copy an older  machine list into the new folder, but not this time. does anyone have a remedy for this? 

This seems to be an ongoing problem when I update to a new version of MasterCam. The only machines available are the default machines, no other machines are shown in the "C:/users/public/public documents/shared Mastercam 2020/CNC_MACHINES". But if I go to that folder all of the migrated files are there. In the past, I could just copy an older  machine list into the new folder, but not this time. does anyone have a remedy for this?    

I have a Right angle Drive mounted on my mill that I need to use to thread mill in the Y,Z (g19) plane. How do I configure MasterCam to ouput Arc on on he G19 Plane

I've written some software that generates G code to cut camshaft lobe profiles on Camshaft cores mounted horizontally on the 4th Axis of my Fadal 6030. I'd like to be able to cut the

Helical gear with the same setup. Does anyone know of a supplier  of end mills for this operation?