For example: when it rotates from B0 to B90 (I got positive B value) when it rotates from B90 to B45 ( I got "B-45", it mean it tells machine go negative direction) but the machine does not need to have " - " in it, so machine can rotate back to B45, do you think can you edit it? Please, Thank you.

I'm using generic post from MasterCAm. Is there any way to change the post to get secondary rotary with always positive number? Meaning it does not need to telling the machine which direction, because machine can always read positive number. The range direction from -5 to 105 degrees. If anyone can change please help with it. Thank you very much.

Hello, I could not understand about 5-axis post processing. I tried to program for 3+2 axis and I got different between un-check and check box at Force Tool Change. When I don't check at Force Tool Change I get A and B different with check at that box. When I checked I got program like: T7M6(1/4 [0.25] X 1.25 OOH/REACH, 0.5 MIN. FL, CARB. BALL EM, USE ER-16 HOLDER ) (OPERATION 11 ROUGH AND LEAVE 0.06) G0G54G90X-5.4378Y-1.25A-90.B75.S9000M3 M10 M68 G43H7Z4.4 M8 Z2.65 G1Z2.15F75. ..... M5 G0G28G91Z0. M11 M69 M01 G0G17G40G80G90G94G98 G0G28G91Z0. T7M6(1/4 [0.25] X 1.25 OOH/REACH, 0.5 MIN. FL, CARB. BALL EM, USE ER-16 HOLDER ) (OPERATION 13 ROUGH AND LEAVE 0.01) G0G54G90X-5.2493Y1.175A90.B70.S9000M3 M10 M68 G43H7Z8.5 M8 Z2.8 G1Z2.3F75. Y1.1743F70. ..... In this case is not convenient because when it needs to rotate to different angle. When I un-checked Force Tool Change I got program like: T7M6(1/4 [0.25] X 1.25 OOH/REACH, 0.5 MIN. FL, CARB. BALL EM, USE ER-16 HOLDER ) (OPERATION 11 ROUGH AND LEAVE 0.06) G0G54G90X-5.4378Y-1.25A-90.B75.S9000M3 M10 M68 G43H7Z4.4 M8 Z2.65 G1Z2.15F75. ..... Z3.6 (OPERATION 13 ROUGH AND LEAVE 0.01) (Next operation with different angle) Z8.5B-75. X-5.2493Y1.175 M11 M69 A-270.B-70. M10 M68 M11 B70. M10 Z2.8 G1Z2.3F75. Y1.1743F70. .... In this case I got rotary turn back to origin of the machine then turn back to the angle that I wanted. So is there any chance to get into the post and make it change to get right angle that I wanted without tool change between 2 operations are using same tool? Thank you for you help.

I have rotary 3+2, but the primary "A" address that is a rotary, facing the spindle, it would rotate about the SYSTEM TOP WCS X Axis. What should I change in the post please share to me? Thank you.