I forgot to mention that the code was same from before

I solved the problem i have a problem with peck drill as well , when i set peck drill for example for 5 to retract it doesn't listen to what i write it always goes - 15 then retract then again -15. So i tried custom drill in drilling options and i set thous settings and there was a dwell and there was a setting that ''set drilling settings for drilling parameters'' . And after that my taping stopped working. It was going down and had a little pause and then was going up and the problem was that dwell setting. Now i need to solve peck drill problem somehow maybe tomorrow i will try to make that custom drill hole settings. Sorry for my bad English maybe you will get it

Hello, Before i everyting worked fine but today i got a problem when i tapping a hole for example i need to tap M4 hole into -10 i set feed rate 105 and spindle speed 150 . The spindle goes clokwise into -10 and then starts spining diferent way but feed rate changes and dont lock to 105spining speed and it should retract but it stays in same position -10 but after one minute feed rate changes to 105 and normaly starts to retract. Its dificult to explain maybe some one will understand the problem

Thanks i will check it tomorrow

Here is my program code i made it for example first tool makes center of the hole end the second drills hole into -70 with peck drill % F3000 N100 G21 N102 G0 G17 G40 G49 G80 G90 N104 G0 G90 G54 X280000 Y0 A0 S1145 M3 N106 G43 H2 Z4000 N108 G99 G81 Z-2000 R4000 F1145 N110 X1048000 N112 G80 N114 M5 N116 G91 G00 Z150000 N118 A0 N120 M00 N122 G0 G90 G54 X280000 Y0 A0 S400 M3 N124 G43 H44 Z4000 N126 G99 G83 Z-75357 R4000 Q5000 F200 N128 X1048000 N130 G80 N132 M5 N134 G91 G00 Z150000 N136 A0 N138 M30 %

Hello everyone, I have a issue, when i am drilling deep hole a peck drill does'nt work properly. For example i need to drill 70mm hole , i set in mastercam driling properties to drill a hole with a peck drill with 5mm (so it has to drill a hole in to -70mm with retracts of 5mm from stock . But when i start the program in the machine first peck is 10mm and the rest peck drill's are 15mm till it reach - 70mm , but i need that retracts will be 5mm not 15mm. I hope you guys will understand what i need my english is not so good. Waiting for quiq respond. Thank you for any information. My Milling machine is Chiron Fz 33 with Bosch system.

Hello everyone, I am starter on editing Mastercam post processor. I need an advice what i have to change on my posts processor file or in ( Mastercam X6 ) to get NC code like this : % /N10G74Z0 /N20G53D0H0 /N30G92Z965000 N40G54S1000M03 N50G0X70000Y-20000H1M08 N60G0Z75000 N70G0Z68000 N80G01X-490000F500 N90G01Y-230000 N100G0Z500000M09 N110 N120 N130 N140G53M05 N150G0X550000Y630000 /N160Z965000 /N170G92Z0 N180 N9999M30 Our post processor code is like this : N10 M0 N20 G0 G21 G90 N30 X-9.6644 Y37.1746 N40 G92 N50 M0 N60 G42 G1 X-12.05 Y39.0569 N70 G2 X-12.55 Y39.557 J.5 N80 G1 Y46.55 N90 X12.55 N100 Y39.5569 N110 G2 X12.05 Y39.057 I-.5 N120 G40 G1 X11.0617 Y39.2093 Our chiron fz 33 machine with bosh micro cnc 8 control system gives me an error becouse code is with dots for example : N30 X-9.6644 Y37.1746 if i write code n30 x-964000 y 370000 than everythink works fine. Maybe someone can give me an advice becouse i can't find it by my self Thank you for helping me !

Post request removed

Allright but how to set those parameter's? sry im newbie dont want to set smth bad

One more question maybe you know how to change language on my robofil 330f fanuc ? becouse now its german language in it but sometimes english words apears so im thinking that there must be english language inside.

You probably right becouse we have doosan dnm 500 cnc miling machine and we specialy buyed that card type industrial grade its fast type write read speed maybe its the reason. I need to try normal cf card then. tnx for advice.

Thank you for helping me , but i am a bit confused do you mean that i have to put my cf card to machine than turn off the machine and later turn it on holding two buttons and than select format ? Can you explain wich keys are "2 right soft keys down"? sorry my english is terrible. thanks again.

I have an adapter and im trying with theese cards http://www.digikey.com/catalog/EN/partgroup/compact-flash/34326 atp 512 industrial grade cf , and transcend industrial grade cf 512 mb . i formated thouse two cards to fat system as its shown on link but still geting memory card error 0099

Im using Robofil 330F charmilllies with fanuc series 18i-wa i have tryed to put in to my top % of program in nc file and in the botom % comes automatically but when im plug in my card pres save then my machines gives me an error "memory card error 00900"

What kind of file you puting to your Cf card? Im uplouding NC file from CiMCo program are you doing same thing? And in my machine when i plug the card and saving program i have to set number 4 thank you for helping me