jt300zx
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by jt300zx
-
-
I forgot the drives SSD Samsung 850 Pros, RAID 0.
That is the hurdle understanding what it is they are doing. I'm the IT guy and all they can tell me is it is slow. After I install I don't mess with settings and so on. I understand the differences in X6 to X9 on how utilize the hardware. But the programmers are being hard nosed about going to X9.
The first time a toolpath is converted from X6 to X9 it's expected to be slow, correct?
-
Hi I'm JT and Systems Administrator for my company. So please excuse the lack of terminology.
I built a pc specifically for a programmer to test before we make 12 pc investment. Here are the basics:
i7 5960x
64gig Ram
Nvidea K5200 8gig
Mastercam X6-9
We thought this thing would be a burner but preforms no better than three year old pcs with 12 gig ram and Nvidea 4000 when creating tool paths. Now, the user's profile and settings are to a network drive. Even when I have the user to first save to local drive, nothing. Is there anything that can be done? I built this monster pc and it's not preforming.
-
Hi I'm JT and Systems Administrator for my company. So please excuse the lack of terminology.
I built a pc specifically for a programmer to test before we make 12 pc investment. Here are the basics:
i7 5960x
64gig Ram
Nvidea K5200 8gig
Mastercam X6-9
We thought this thing would be a burner but preforms no better than three year old pcs with 12 gig ram and Nvidea 4000 when creating tool paths. Now, the user's profile and setting are to a network drive. Even when I have the user to first save to local drive, nothing. Is there anything that can be done? I built this monster pc and it's not preforming.
Help or Advise-Running tool paths is Very Slow Mastercam x6-x9
in Industrial Forum
Posted
Thank you so much, that explains a lot. But I changed both to local and it is still writing out to the network drive. So it must have another setting?