Here ya go done for you the only issue i have is it keeps it from adding M08 at any other tool change but the first havent fig that out yet. If i could find a way to keep M08 on all tool changes even if a M09 was never called you would be set. Go to pretract find the cc_pos is reset in the tool change copy and paste everything under it #cc_pos is reset in the toolchange here cc_pos$ = zero gcode$ = zero if use_rot_lock & rot_on_x, [ if (index = one & (prv_indx_out <> fmtrnd(indx_out)) | (prv_cabs <> fmtrnd(cabs))) | nextop$ = 1003 | frc_cinit, prot_unlock ] if nextop$ = 1003, pbld, n$, sccomp,*sm05, psub_end_mny, e$ if convert_rpd$, pconvert_rpd if nextop$ = 1003, pbld, n$, scoolant, e$ if nextop$ = 1003, pbld, n$, [if gcode$, sgfeed], sgabsinc, sgcode, *sg28ref, "Z0.", [if gcode$, feed], scoolant, e$ if nextop$ = 1003 | tlchg_home, pbld, n$,"G90","G53", "X-12.", "Y0.", protretinc, e$ else, pbld, n$, protretinc, e$ if (subactv = zero & use_g52_shft & wrkofs_num = zero) | shft_flg = one, [ n$, *sg52, "X0. Y0. Z0.", e$ #Cancel Work Shift shft_flg = zero ] absinc$ = sav_absinc coolant$ = sav_coolant uninhibit_probe$