-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Okumawiz
-
-
Your problem is probably that you tried to change spindle modes with your G96 still active. You cannot change modes if G138, G96, Nose comp, Lap cycle, M110, etc. are active. They need to be cancelled before attempting to switch modes.
Best regards,
Okuma Tool Change Help - MB-46VAE w/OSP-E100M Control
in Industrial Forum
Posted
Typically you will want to install the tool change macro into your machine so that it can be used in MDI or from any program and it will always be memory resident. Some use G116, some use G111. You will need to go to your G/M code macro page and set the G111/G116 to OTCHK.
Then you will need to register the following library program: (TOOL.LIB)