hi, sorry for the bad English (I have to translate with google) I ask if you can help I have a new lathe with live tools and Y axis (HAAS ST20-Y) until now I have always used only Mastercam for milling, now I'm just getting started with the lathe module. (mastercam x7) My problem concerns the milling: having to run a hexagonal seat on the face I created the necessary ops and simulation are also successfully performed but the post-processor generates the wrong code .. I explain: 1) if the "rotary axis control" I enable axis Y board the ISO code of the cutter path has correct syntax but the X coordinate values ​​are doubled -as it would be fair if I were lathe- but I have to mill a figure thus the X must be real, not doubled! 2) if the "rotary axis control" tab put no rotation after me from a program with C and X where X is always double. The hexagon is not crushed as before but it is twice the size. 3) if in the "values ​​miscellaneous" I enable Mill cyc G107 / G112 ... added the code G112 at the beginning of the path, but the program is even worse: the X's are always double, the Y became C but with the values y .. I tried to edit the post (Generic HAAS SL 4X MT_Lathe.pst) but I can not thanks for your help