It looks like the plunge feed rate & feed are on the nci 20004 line, is it not possible to get it from there? I would rather have the tools setup with the plunge feed instead of enabling a custom parameter every tool path. 20004 1 3 1 0 0.125 0. 0. 120. 0 0 2.4 50. 2.4 1600 16 2 50 is the plunge feed & 2.4 is the feed

These are pretty ancient post that have been updated along the way. I don't see/understand how to add the plunge feed rate in the control definition manager? Sorry

I have added the switch in the post to enable long code when the subsequent peck is other than zero: pdrill0$ #Pre-process before drill call if drillcyc$ = 1, #Peck Cycle is programmed [ if peck2$ = 0, usecanpeck$ = yes$ #Use canned cycle for peck else, usecanpeck$ = no$ #Use long code for peck ] This works great. It outputs a feed rate only on the first peck. What do i need to add/format to enable it to output the plunge feed rate on the first peck & feed rate on the subsequent peck? The plunge feed rate is grayed out in the tool page? Also could we add an option to feed into the hole instead of G0? Thanks!