I have two questions. Rotate 4axis I set the TP_SRF_4AX to the operation_manager function and created the operation. I'm not sure how to add a "4axis point" as a geometry. Curve 5 axis I set the TP_5AX_CURVE to the operation_manager function and created the operation. I'm not sure how to set geometry (as drive curve) to this operation.

Hello,Roger. Sorry for the slow reply. The creator checked the value and it was FALSE. Thank you for your imformation! I appreciate your help.

I'm working with Chook in V9. I'd like to set the parameter of 5axis drill toolpath, but I couldn't set the retract value. I believe that I could set the retract value to "retract_pln" in op_common. Does anybody know how could do this?

Thank you for you reply. But it's not exactly my status. My icon is displayed without "X"(dirty) mark.

Thank you for your help. But I'd like to know why my NCI icon is displayed in strange color. (with light blue with black lines)

I have a question about the color of NCI icon in the toolpath manager. For this icon, Mastercam has two color of status. Black with grey lines for displayed, grey with green lines for not displayed. But one of our customer loaded MCX file whose toolpaths had created with our customized chook, the NCI icons are displayed with light blue with black lines. I couldn't find this bitmap of this icon in resource files of Mastercam. Does anybody know that how Mastercam assign this icon and meaning of this color of icon?

I could compile the resource properly. But when I run the application and Mastercam tries to create the property sheet,Mastercam always stops. With Sp1 release, when I created a toolpath operation in the file, I could create a property sheet. But after MR1 release, there should be something to create the property sheet. Does anyone have any information for this?

Hello, I'm trying to create a property sheet as follows. MCPropertySheet ps("test"); CToolProp ctp; ps.AddPage(&ctp); // ***********stops here. ps.DoModal(); Do I miss something to create a property sheet?

I'd like to read from the machine group that are loaded in the operation manager.

It's C-Hook.

Hello, I'd like to get values from Op.feed rate limits in the "General Machine Parameters" into my application. I have no idea to get this value.

Yes, I'm sure that I'm using the DEBUG version.

Jon, Do you have any idea? mimi

Jon, Thank you for you reply. But this error doesn't happen when I try to run the C-hook. This error occurs when I try to start Mastercam from VC. After loading "C:MCamX-MR1resourcesMCCoreRes.dll", the accessing error "exception:0xC0000005" occurs. It seems that Mastercam has accessed the address "0x000000" and "0xffffffff". So I believe that Mastercam accesses the valriables that are not initialized. When I try to debug my program, the error I mentioned above occurs fifteen times, then encounters "break point of user setting" and my debugger stops. Is there any necessarry information to solve this problem? mimi

Hello, I couldn't debug my program on MR1 release with an error. When I try to debug my program, I've got an following error. Debug Assetion Failed! Prpogram:CMcamXsdkdebugMastercam.exe File:wincore.cpp Line.384 I could debug my program with SP1 release and I used Visual Studio 6.0 with SP1 release. I've changed my environment to VisualStudio 2003 with MR1 release. Does anyone have information about this?