Loc41
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Loc41
-
-
Would any of you intergrex experts out there have any idea why the following code would hang up on line number N369? That's what line is highlighted on the program monitor screen anyway.
The REALLY weird thing about this is......the machine does the tool change to T5136 on line N363 and then just sits there. No red or blue alarms and the cycle start button is still green like the machine is running. The machinist can then RESET the machine, and do a NON-MODAL restart from line N358, and everything runs fine.
Here's the program.
( )
(TOOL 2190, 80 DEG. BORING)
(FINISH BORE ID)
( )
( )
N324 M901 (MAIN SPINDLE SELECT)
N325 M200
N326 M202
N327 T2190 T5136 M6
N328 G99
N329 G18
N330 M250
N331 G0 B0.
N332 G53.5
N333 M251
N334 G50 S2500 R1
N335 G96 S500 M4
N336 G0 X8.016 Z2.9183 M153
N337 X1.5106
N338 Z.0707
N339 G99 G1 X1.652 Z0. F.006
N340 Z-.0017
N341 G2 X1.6507 Z-.0023 R.008
N342 G1 X1.6307 Z-.0123
N343 G2 X1.626 Z-.018 R.008
N344 G1 Z-2.4421
N345 X1.2891 Z-2.469
N346 G2 X1.2795 Z-2.4717 R.008
N347 G1 X1.2596 Z-2.4833
N348 G2 X1.2576 Z-2.4847 R.008
N349 G1 X.875
N350 X.775 Z-2.3981
N351 M154
N352 G0 Z2.9183
N353 X8.016
N354 M5
N355 G28 U0.
N356 G28 W0.
N357 G28 B0.
N358 M1
( )
(TOOL 5136, 1.00 BALLNOSE)
(ROUGH THE HALF SPHERE)
(LEAVING .020 STOCK)
( )
( )
N359 M901 (MAIN SPINDLE SELECT)
N360 M200
N361 M202
N362 T5136 M6
N363 G99
N364 G18
N365 M250
N366 G0 B0.
N367 G53.5
N368 M251
N369 M610 (GRINDER MODE ON)
N370 M611 S500 (MILLING SPINDLE SPEED)
N371 M203 (MILLING SPINDLE FORWARD ON)
N372 G50 S4000 R1
N373 G97 S1000 M3
N374 G0 X9. Z2.4263 M153
N375 X1.3952
N376 Z-2.396
N377 G99 G1 Z-2.496 F.006
N378 Z-2.684
N379 G2 X1.2159 Z-2.9719 R.53
N380 G3 X1. Z-3.0784 R.1079
N381 G1 Z-2.9784
N382 G0 Z2.4263 M9
N383 X9.
N384 M205 (STOP MILLING SPINDLE)
N385 M5
N386 M612 (GRINDER MODE OFF)
N387 G28 U0.
N388 G28 W0.
N389 G28 B0.
N390 M1Any info would be greatly appreciated!
Thanks!
-Mike-
- 2
Intergrex 300 IVS just hangs up
in Industrial Forum
Posted
We FINALLY figured out what was causing my issue.
While in "grinder mode" you cannot use constant surface speed.
So I just had to move line N373 before line N369.