RScanner
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by RScanner
-
-
Is there a way to use multiple tabs on a block. I'd like to rough and finish a block with say TWO tabs to support, then come back and cutoff tabs and drop the slug. I don't want to manually draw the tabs.
Thank you in advance
-
Just to follow up, I did not have updated post. This is now resolved
-
I see this is an old discussion. I'm having this issue with 2022. I get "No operations selected..." even when I click on the parameter button, never mind the post button.
-
For some reason, this does not work. Can someone help me out. MasterCam Mill 2020. I chose backplot, hit save as geometry, saved it to level 20, run backplot and no geometry created. Thank you
- Rich
I found the solution, I have to run the toolpath first then hit save as geometry.
- 1
Multiple Tabs Wire EDM
in Machining, Tools, Cutting & Probing
Posted
Update: I found a work around. I break the geometry and put a thread point near breaks.
Thanks