lzerroug
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by lzerroug
-
-
that's another problem i have, when i go on canned text, ihave no texts to add, is there a place i can go look for them on the computer? and what does 'force tool change' really do?
-
okay, if that's the way to do it then, i'll get to it. thanks
-
Hello everyone,
this is gonna be my first post ever so bear with me if you find my question kind of obvious.
Is there a way to stop the machine before it does the finish pass?
i'm using 2D pocket for an open pocket and i use the finish option in the toolpath on which i added a wear control. i was wondering how can i add a M01 within the operation to verify the amount of wear i should add?
should i create a new toolpath just for the finish and add a manual entry between the two or is there a way to do it in the same toolpath.
thank you for your help.
Hole machining in Mastercam
in Industrial Forum
Posted
Hello everyone,
I have a little beginner problem with some parts i'm machining, they have a hole of 1.258 +0.002 -0.0. i use circle Mill on mastercam to rough and another seperate circle mill toolpath to finish with an M01 between the two,
Now the problem i have is that the hole is not completely circular, i measured many different values ranging from 1.250 to 1.265 in the same hole. i try to change my offset to get the right tolerances but it can't seem to have one value when measures,
i used my Lathe to create a kind of Go/Nogo, to quickly verify my parts, the go side has 1.255'' and the no Go has 1.563''. can i just rely on weather the go enters or not? or is my go way too small to give the right readings?
On a seperate question concerning machining tolerances, i have had to machine a part like the one in the picture with a tolerance of 0.003'', but as you see the space walls are too long, so i can't have only one constant measurement between the walls all along them. (PS: the units of the drawing are in millimeters)