No worries. I really appreciate your help. I definitely don't know enough in the area. We just received a new machine and I am updating our Horizontal post. Any chance you know how to force the B value in the G54 line at every tool change?

Thank you very much for your help. I used what you gave me and it worked for everything but still showed the D values. More importantly it showed me where to look and I was able to look through my old post and copy the code that I needed. Thank you again for your help. Below is what I used and it works. ptooltable # Write tool table, scans entire file, null tools are negative tnote = t$ toffnote = tloffno$ tlngnote = tlngno$ spaces$=0 if t$ >= zero, [ if tcr$>0, scomm_str, *t$, " = ", plistcomm, scomm_end, e$ if tcr$=0, scomm_str, *t$, " = ", plistcomm, scomm_end, e$ ] #if t$ >= zero, # [ # if tcr$>0, scomm_str, *t$, ptspace, " - ", plistcomm, " - ", *tlngno$, phspace, " - ", *tloffno$, pdspace, " - ", *tldia$, punit, pdiamspc, " - ", *tcr$, punit, " - ", popnote, scomm_end, e$ # if tcr$=0, scomm_str, *t$, ptspace, " - ", plistcomm, " - ", *tlngno$, phspace, " - ", *tloffno$, pdspace, " - ", *tldia$, punit, pdiamspc, " - ", " - ", popnote, scomm_end, e$ # ] #if $t >= zero, # [ # scomm_str, *t$, ptspace, " - ", plistcomm, scomm_end, e$ # ] #if t$ >= zero, # [ # if tcr$>0, scomm_str, *tnote, " ", *toffnote, " ", *tlngnote, " ", *tldia$, " ", *tcr, punit, " ", popnote, scomm_end, e$ # if tcr$=0, scomm_str, *tnote, " ", *toffnote, " ", *tlngnote, " ", *tldia$, " ", popnote, scomm_end, e$ # ]

I am using the MP Master post and I would like to not have the H,D and R values in the tool list description. Where inside the post do I turn it off?