dynimighty
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by dynimighty
-
-
On 1/18/2020 at 10:27 PM, #Rekd™ said:
The main problem with your file
tutorial #4 Review Exercise.emcam
Thanks for the help.
-
On 1/17/2020 at 7:58 AM, #Rekd™ said:
See the attached photos.
2) Re-draw your wire frame geometry correctly.
Quotethe 90 pocket feature, I assume the 7 degree line is tangential on both radii but that does not work, am I missing something?
-
On 12/28/2019 at 5:41 AM, c++ said:
From the picture, you have an incomplete chain.
Try creating a silhouette boundary geometry, or select create curve on all edges then select only the face mask. You could also just join the broken line in the wireframe. Or widen your chain tolerance (not recommended!!).
i wish i undersood. thanks though.
-
On 1/6/2020 at 7:29 AM, #Rekd™ said:
Please attach your file and I will show you how to fix the problem.
-
not a response, a new question about:
tutorial #4 Review Exercise
In Mastercam 2019 Mill Essentials eCourse, my model is not working. it is not perfect as to the joints, i tried to do the wire work in by drawing only a quarter and then translating the rest which i think is causing other problems. Where is the problem?
https://www.evernote.com/l/ADJKqDKmdrZFfayflo1OJBo9dUav8Ads_bk/
-
-
Mill Advanced tutorial 5b
in Educational Forum
Posted
why is my stock in the wrong position?