Yes I want set collision between holder and workpiece but in settings to choose I do not have options "holder". I can set only "tool". In tool segments is holder, arbor, shaft and flute.  In attachments is picture. How can I separate holder and tool? 

Hi,

I made machine simulation and I get collision check between tool and workpiece. In machine simulation when tool go into the wokrpiece they doesn't signal to collision. Collision between tool and fixtuere, between tool and C-axis work fine. What I do wrong? Pic in attachment

19 hours ago, Lucho 1 said:

Hi guys, I'm trying to mill these two notches, on lathe cross contour milling, on the attached model tool path # 2 the end mill isn't cutting the whole bottom surface, on tool path #4 I cant fix the chaining so the end mill stays inside the geometry. Any help will be most appreciated. 

SCND NOTCHNG FAILING.mcam

hi. look for my example. in operation #1, #3 you must chain the top chain, and the tool must be bull endmill. for operation #2 and #4 is the diferent radius in corner (not R0.5). So, for that I can't  help.

SCND NOTCHNG FAILING.mcam