Thanks crazy^millman. I have no experience with buffer. I try to input your code into my my post but when I posted the code out and it get bunch of error. I am using mastercam 2023 and I may ask my reseller for help.

Hi everyone, I am trying to figure how to to export multiple Tool length offset and Diameter offset for one tool in tool table. Sometime I use one tool to finish the slot and the hole to locate a dowel pin or following some feature that drawing call out. I want to use a good tool to finish couple feature but for easy to control I may use multiple Tool length offset/Diameter offset. My question is how to notice difference H/D in tool table for set up guy to catch up! Ex: (PRG. ON NOV - 06 - 22 - 20:50 BY .... ) (T20 * 1/2 FLAT EM, 3 FLT, .500 LOC, 1.00 OFH | H20 | D20 | D0.5000" | CONTOUR) (WARNING T20 | D40 - OPERATION 15 - FINISH .500 HOLE | D60 - OPERATION 16 - FINISH .500 SLOT) (T2 * 3/8 SPOTDRILL | H2 | D2 | D0.3750" | DRILL/CBORE) (T15 * 1/4-20 ROLL TAP | H15 | D15 | D0.2500" | TAP........) (OVERALL MAX | Z2.) (OVERALL MIN | Z-1.02) Any help is greatly appreciated!

Hi everyone, We have one problem when update mastercam 2022 to 2023. When we have 5 toolpath use the same tool, if we re number for the tool, just only the 1st toolpath match everything and all other only update tool number but tool length and tool dia use old value. I known I can use renumbering tool option but when I want to randomly change couple tool, the problem still there. I think this is an bug on Mastercam 2023. I has already contact my local reseller and they got the same problem. They told me that this bug gone on mastercam 2024 but update 1 on mastercam 2023 still have it. Anyone see that problem and any trick to deal with it? Thanks.