Chris Lemerond
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Chris Lemerond
-
-
We run MC 2020. We do multi axis programming including 5 Axis, Modeling and Assemblies. We just purchased a new computer Dell 3630 I7-9700, 8 core 12MB Cache 3 Ghz, with a NVIDIA P2200. Pretty much what Mastercam recommends for a base model.
Problem is on the Modeling and Assemblies or Multi Axis programming the graphics are not there (pixelated) and the computer starts sucking wind.
Three things I ask.
1. My thought is to upgrade the NVIDIA P2200 to an NVIDIA P4000 any thought s on if that would fix things ?
2. Can anyone recommend some specs that will give us the horse power we need ?
3. Would a single NVIDIA card be enough or should we get two as I'm told when resource on top GPU is utilized the second one will be used.
Thanks,
Chris - Bayside Machine - Green Bay WI
www.baysidemachine.com
Hardware recommendation
in Industrial Forum
Posted
For all that asked the amount of RAM is 32 GB. Glad to hear that one good card is better than two, so I'm now ruling that out. - If After making sure the graphics card is being utilized properly I will upgrade to an NVIDIA P4000.
if anyone doing high end stuff like this could share their specs that would be helpful too.
Thanks All !!!