-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by thewarrior1012
-
-
So, I'm running X2 MR2 and I frequently use STL files in my verifies. After updating to MR2, it seems that it reset my STL default directory to a local -data- directory. I need it to go to a network location, but I cannot find where that gets set. It doesn't appear that you can pick those default locations through Configuration > Files anymore.
Please Help? It is a small annoyance that gets me 20 times a day now...
Todd.
Posting - Network vs. Local
in Industrial Forum
Posted
We currently have 3 seats of Mastercam and we have our configurations set to pull a common set of files, ie tool library, operations defaults, etc. The files save directly to the network, both MCX and NC. Recently I had to take my system to a vendors place to do some R&D work with their bed mill, and noticed that posting times went from 5-6 minutes to post a file down to less than 30 seconds. At first I thought maybe I was on a bad port on the network, but after returning and swithcing ports on our switch, same results. So what should I be looking for to debug this? This is a huge detriment that we never realized existed.
Thanks.
Todd G. Martin