Search the Community
Showing results for tags 'x7 sp1 mpmaster x7 feedrate'.
Found 1 result
-
using mpmaster x7 version or mpmaster x6 version in x7 sp1 when you post a program using an advanced toolpath (anything other than simple 2d toolpath ie contour or pocket) it feedrates z axis all the way to the retract point. it only does this on the first toolpath at the beginning of the program. any help would be great example 1: is roughing toolpath opticore G01 G17 G20 G40 G80 G90 G91 G28 Z0. (ROUGH PROFILE) (COMPENSATION TYPE - COMPUTER) T14 M06 (1/2 FLAT ENDMILL ROUGH) (MAX - Z.1002) (MIN - Z-.7347) (TOOLPATH - M.FINISH.........) (STOCK LEFT ON WALLS = .01) (STOCK LEFT ON FLOORS = .01) M08 G01 G17 G90 G55 B0. G94 X-1.5865 Y-2.6752 S2300 M03 F20. G05.1 Q1 G43 H14 Z.1002 T90 Z-.5197 F125. example 2: is toolpath contour G00 G17 G20 G40 G80 G90 G91 G28 Z0. (ROUGH RIGHT SIDE) (COMPENSATION TYPE - WEAR COMP) T14 M06 (1/2 FLAT ENDMILL ROUGH) (MAX - Z.1) (MIN - Z-.7347) M08 G00 G17 G90 G55 B0. X1.9865 Y.7722 S2300 M03 G05.1 Q1 G43 H14 Z.1 T90 G94 G01 Z-.7347 F125.
