Legacy Renishaw Probe Calibration Macros

[mayu]

Hello eM,

Is anyone using the legacy probe calibration macros 9802 and 9803? The former is XY calibration and the latter is stylus calibration. If so, could you post a code sample of how you are using this macro with a ring gage?

Thank you

[cncappsjames]

%
<PROBE_CALBRATE_XY>
(PUT STYLUS INSIDE RING GAUGE)
 
(RING GAUGE DIAMETER)
#100=1.7812
 
S10M3
G4X0.5
M5

#502=#0(CLEAR X OFFSET)
#503=#0(CLEAR Y OFFSET)
#17=.5(OVER TRAVEL)
 
G65P9025A1.C1.D#100Q#17 (RENISHAW EASYSET)
#1=#140(X OFFSET)
#2=#141(Y OFFSET)
 
(-)
S10M3
M5
M19
(-)
 
G65P9025A1.D#100Q#17 (RENISHAW EASYSET)
#3=#140(X OFFSET)
#4=#141(Y OFFSET)
 
(AVERAGE OFFSET)
#5=[#1+#3]/2(AVERAGE X)
#6=[#2+#4]/2(AVERAGE Y)
 
G65P9832(PROBE ON)
 
G65P9810X#5Y#6F50.
G65P9802D#100Q#17
G65P9803D#100Q#17
 
G65P9833(PROBE OFF)
G00G53Z0
M30
 
%

[mayu]

Thank you so much! Extremely helpful.

We actually don't have the easy-set 9025, so I'll sweep the ring gauge manually and store the values in G54. There's a fear that someone may mistakenly utilize the G54 Z offset so I transferred the G54 values into locals #1 and #2. Haven't thought about it long enough to determine if that's an effective safety precaution - still brewing on it.

(INDICATE RING GAUGE)
(STORE XY VALUES IN G54)
(POSITION PROBE AT CENTER OF RING GAUGE)
;
G00G54
;
(CLEAR LOCALS AND COMMONS)
#1=#0
#2=#0
#503=#0
#504=#0
;
(RING GAUGE DIAMETER)
#100=1.0
;
(OVER TRAVEL)
#101=.25
;
(TRANSFER G54)
#1=#5221
#2=#5222
;
(MACRO CALLS)
G65P9832(PROBE ON)
G65P9810X#1Y#2F30.
G65P9802D#100Q#101
G65P9803D#100Q#101
G65P9810Z1.0F60.
G65P9833(PROBE OFF)
;
G00G53Z0.
M30