G5 question

[So not a Guru]

We have post that doesn't turn off G5 at G53 retracts during toolpaths. The pretract0 block had the phsm_off lines commented out. So, I have uncommented the 2 lines and my code at the G53 retracts now looks like this:

X-.8462 Y-.5554 Z2.1968
G0 X-.8301 Y-.5502 Z2.6966
X-.7817 Y-.5348 Z4.1957
G5 P0
G61.1 P0
G49
G54.4 P0
G0 G53 Z0.
G54
A-35.7367 C271.0115
M46 M43
G65 P9544 H1 (CALCULATE G54.4 DYNAMIC OFFSET)
G54.1 P300 (CENTER OF ROTATION WPC)
G54.4 P1
S998 M3
G43.4 H18 X2.4518 Y-.5197 Z3.0954 A-35.7367 C271.0115
G61.1 P7
G5 P2
X1.5758 Y-.5351 Z1.8778

 

I know that a G49 must be called before a G5 P2, but do I also need to modify the post to output anything before the G5 P0?