"Failure in stock definition" Error

[[email protected]]

I am recieving this "Failure is stock definition" error. I don't get why I changed everything back to Top plane. I brought in an .step file of what my raw material looks like and selected it as stock model. that didn't work so i deleted the stock model and just went through the Stock setup Menu under properties and I still recieve the same message. It's so simple I have never seen this error before. my plane manager now shows Top as the only plane used for anything but it won't let me simulate or verify this stock. I would post a zip2go but I don't know if I am allowed to do that from where I'm at.

Not sure why I made this post before restarting it. I just reopened the file and it works now but still curious if anyone else has had this. Another possible reason could be that IT has not installed service patch 3 or whatever you call the final patch update that came out for 2023.

 

[TFarrell9]

This happens to me every once in a while as well. In a few cases, the stock setup will "forget" the stock definition I had selected, yet when reselecting it, will still give me this error. Closing and restarting Mastercam always fixes it for me.