2024 mill duplicating tools

[volitan71]

Since updating, I'm getting a lot of duplicate tools.

For example, just now I used a 1/32" em to do some dynamic milling, when finished with that, I selected some lines to contour, set the parameters. and now I have 2 tools, both 1/32 endmills and both tool #1. I had to go to the 2nd operation and select the first one specifically for it, then I could delete the 2nd one.

Is there a default setting for this behavior that was changed?

Thanks

[mwc815]

This has happened several times in mc2024. Never happened in mc23 or earlier versions.

Mike