3D High Speed (Area Rest Roughing) does not work with "One other operation" (2023)

[SlaveCam]

If previous operation uses "One other operation" setting and that "other operation" is not immediately before 3D High Speed, I get the joyous "Reporting computation error". If the "other operation" is right before 3D High Speed, it works.

[jpatry]

On 11/26/2023 at 8:20 AM, SlaveCam said:

If previous operation uses "One other operation" setting and that "other operation" is not immediately before 3D High Speed, I get the joyous "Reporting computation error". If the "other operation" is right before 3D High Speed, it works.

Can you use a stock model as an intermediary?

[SlaveCam]

Sure but it does not fix the bug

[billb]

Hi, when you have a chance and if you are able, would you please email us your part?  Send it to [email protected].

I created my own MC2023 Mill test part and it works (one other op before or after).

Perhaps there is a specific parameter setting that is causing trouble.

Thank you.

[SlaveCam]

I was just making the package but now all of sudden I can't reproduce it any longer! It showed the "computation error" once and when I regenerated again, it somehow succeeded. Now I am not able to make the error show up any more.

[billb]

I believe you!  I got the computation error, once, when I did a copy/paste and regen.  But now I cannot duplicate it either.  I'll keep trying.

[billb]

In MC2023, I finally got the computation error - I have to move the 3D HST operation after the one other operation, regen, move it back, regen, move it forward, regen, and, eventually, I will get the error.  Logged this as D-53533.   

This error doesn't seem to repeat in MC2024 and MC2025.