Coolant modification

[riverhunter]

MC 2024

IHS IKE post

machine is a fanuc robo drill

 

Has anyone successfully added a height offset to a coolant command to be used as a coolant position?

Something like this  

else, pbld, pn, (strcancool + tlngno$), pe, pms   

to get this

N5

G00 G90 G17 G20 G40 G49 G80 G94

(T5     - 0242_HSS_STUB_DRILL  - H5     - D5     - DIA .242")

T5 M06

G54

H5 M08 ********************added coolant position to match tool length offset  

X-1.0935 Y.6259 S2368 M03

G43 H5 Z1.

G94

G98 G83 Z-1. R.1 Q.1 F7.1

X1.6043 Y.6115

G80

X-.6306 Y-.3258

G98 G83 Z-.75 R.1 Q.1 F7.1

X1.1352 Y-.3153

G80

G49

M09

M05

G91 G28 Z0.

M01

 

[riverhunter]

its outputting with this line.

 

else, pbld, pn, *tlngno$, strcancool, pe, pms 

 

problem i have is it is also outputting the it on every other line as well

N5

G00 G90 G17 G20 G40 G49 G80 G94

(T5     - 0242_HSS_STUB_DRILL  - H5     - D5     - DIA .242")

T5 M06

G54

H5 M08

X-1.0935 Y.6259 S2368 M03

G43 H5 Z1.

H5 ***************

G94

G98 G83 Z-1. R.1 Q.1 F7.1

H5 *************

X1.6043 Y.6115

H5 *************

G80

H5 ************

X-.6306 Y-.3258

H5 ***********

G98 G83 Z-.75 R.1 Q.1 F7.1

H5

X1.1352 Y-.3153

H5

G80

G49

M09

M05

G91 G28 Z0.

M01