Helix bore

[mmonica]

I'm using helix bore for the first time. I can't seem to get cutter comp to work, I'm using wear and left selections. Any suggestions.

Thanks,

Mark

[LFP]

What I like using is the contour option. If you play with lead in/out line length and arc radius numbers and use 2D ramp it works great. One thing you must do is to change the Arc sweep to 135 degrees. example; using .625 cutter to bore .750 hole requires 7% line length and 7% arc radius with 135 deg. arc sweep. Ramp can be set to whatever depth of step you want.

 

Hope this works.