post help

[Robert Ouellette]

hi every one

recently upgraded to 9.1 router and now my post will only output 1 digit after the decimal in the feedrate (F15.1 ). what do i look for in the post to make it output to 3 digits after decimal (F15.123)? i program for a waterjet and in the 3-5" thick stuff i need the much lower feeds.

 

thanks

Bob

Hydrotech cutting

[Guest CNC Apps Guy 1]

look for

 

fmt F 15 feed #Feedrate

 

change the 15 to

 

code:

---

fs2 9   0.1 0.1     #Decimal, absolute, 1 place

fs2 10 0.2 0.2 #Decimal, absolute, 2 place

fs2 11 0.3 0.3 #Decimal, absolute, 3 place

fs2 12 0.4 0.4 #Decimal, absolute, 4 place

fs2 13 0.5 0.5 #Decimal, absolute, 5 place

---

the number between 9-13 depending on what number of decimal places you want.

 

HTH