O/T Mazak HTC-400 Info

[Slixmix]

Any one out there have any info on this machine? I need to know the max diameter of the envelope. Can't find the manuals for the machine. Thanks.

[Jack Mitchell]

Use a tape measure to check the tool pot pitch.

As I recall 4 ½” is the maximum diameter; you can use an adjacent pocket providing you call it a large diameter tool in your tool data screen which keeps both adjacent pockets clear in the event that you use large diameter tools.

 

Manually stick a couple of large face mills into the magazine prior to calling a tool change – just to be sure.

 

Regards, Jack

[Slixmix]

Thanks Jack. But, I was talking about the max diameter a part can be and still be able to rotate the pallet without smacking into the walls. Usally in the book it has a diameter drawn from pallet center that a part cannot exceed. Thanks again.