problems with posting program

[JCLM]

I am trying to post out my program for a Makino A77 horizontal mill. I am rotating around the part and mill some pockets at every 22.5 degrees. I am using a Fanuc post(mpfan). When I try to post the program out it gives me this message:

 

Errors were detected during posting!

Do you want to view the errors?

 

I view the errors and this is what it says:

 

 

Combined Mill and Lathe Post Processor Version 9.19 © Copyright 1992-2004 CNC Software, Inc.

Processing file with A77REV5...

 

Only single-axis rotation is allowed!

Angles may be incorrect.

- OP_ID 7

 

 

Any suggestions?

 

 

Thanks,

JCLM

[CAM]

this usually happens when you edit your post incorrectly.check all changes you or someone else may have changed.also make sure you are using a mill post and not the mpfan lathe post

[Guest]

Check the tool planes for the rotated features. Some may have the axies flipped.

[mayday]

you have conflicting WCS rotations. check what you are calling the top in your WCS. maybe reset all your T/P planes and dont use the wcs only names planes.

[JCLM]

I've created new T/P planes and I'm only using one WCS. When I backplot the toolpath in Mastercam it looks correct. Any other suggestions? Thanks!

[JCLM]

Nevermind! My brain locked up for awhile!