Needed Information

[clark]

Hi Guys,

Just wanted to know how the Plastic chairs are manufactured. Which type of machines are used. 3 axis or 5 axis???.

This forum is real full of information.

Best Regards

[cadcam]

Well i would in most case's would be injected.

now are you asking if the molds were made with a 3 axis or 5?

------------------

jay/ aka cadcam

Precision Programming

email: [email protected]

web: www.ppcadcam.com

[This message has been edited by cadcam (edited 07-22-2001).]

[clark]

yes, You are right. I was asking on which type of Cnc machines ,3 axis or 5 axis is the cavity and punch normally cut. Any link for this information in the web be very appreciable.

[cadcam]

Well clark that is hard to say unless i made the mold & what type of plastic chair you are talking about there are over a 100 types.

sorry hard to help other wise need more info.

or you can tell me what exactly you are looking for, if there is some thing specfic.

------------------

jay/ aka cadcam

Precision Programming

web: www.ppcadcam.com

-------------------------

[This message has been edited by cadcam (edited 07-22-2001).]