Scaling geometry (should be an easy ones for you gurus out there

[Michael Reynolds]

I'm trying to scale a part that has dimensions -n- drafting notes to 3/4 of it's original size. I want the dimensions to automatically update.

Thanks if advance for your expert opinions!

Mike R.

[gstephens]

If the dimensions are associated to the geometry, just use xform-scale and give it a factor of .75. If not, you'll have to re-create the dimensions or manually scale them with edit multiple.

[Michael Reynolds]

Hi Gstephens!

I just finished doing the create, drafting, multi thing to manually scale the dimensions, but is the reason they did not automatically change when I scaled the geometry because I didn't have my globals set right? the box that said "associate sompin" in the globals parameters WAS NOT set.

Thanks for the info!!

Mike R.

[cadcam]

Mkie Yeeep..you herd direct form that masked man gstephens.

[CycleTimeCharles]

When scaling geometry with dimensions, make sure you do not select the dimensions, just the geometry.