graphic--zoom in/out

[apprentice]

Hi,

I noticed all of a sudden the scroll on my mouse does not work. I can use it to zoon in / out. How does I bring the fucntion back??

[MCam Newbie]

Apprentice,

 

Open control panel in Windoze, check you mouse settings. If that is no help, below is excerpt from MasterCam help.

 

Zoom magnifies a portion of the graphics window. When you use this function, Mastercam prompts you to draw a rectangular selection window around the portion of the graphics area that you want to magnify. The graphics window then fills with the contents of the selection window according to the largest direction. You can access this function from the right-click menu, the Screen-Zoom button, by pressing [F1], or by using the mouse roller.

Note: The mouse roller zoom function may not be supported by older operating systems such as Windows ’95 and NT 3.5.

 

1.Right click in the graphics window to display the menu.

 

2.Choose Dynamic Zoom. The menu closes.

 

3.Select a point to begin dynamic zooming (magnify a portion of the graphics window).

 

4.Move the mouse to dynamically zoom the entity.

 

Note: If desired, press [D] for Dynamic Spin, [Z] for Zoom, or [P] for Pan.

 

5. Click the left mouse button when done.