post mods for Blum laser, Renishaw probe, baladyne

[35K chipper]

I am looking for mill post modifications in order to use 3 items i purchased when i bought this okuma md45vae 35k spindle with every bell and whistle i could get. first is the renishaw probe, second is the blum laser for tool length, diameter offset and break detection, the third item is a baladyne automatic and active tool balancer. we do alot of unattended high speed machining with this race horse and i would sleep beter at night knowing the three watch dogs were running inside my programs. the control is an osp-u100m.

 

thanks,

35k chipper

[Guest CNC Apps Guy 1]

I'm working on that right now. It's about 75% complete.

 

This is what I'll be checking with my post. This everything you're looking to check?

code:

---

	#(A=NUMBER OF MEASUREMENTS, MAX. 10)

#(B=RADIAL OFFSET FOR LENGTH MEAS.<TOOL RADIUS, NO MEAS. IF B=999)

#(C=NUMBER OF CUTTING EDGES, NO CUTTING EDGE CONTROL WITH C<=1)

#(D=TOOL RADIUS OFFSET NUMBER)

#(E=POSITION IN Z ABOVE TOOL TIP FOR RADIUS MEAS., NO MEAS. IF E=999)

#(H=TOOL LENGTH OFFSET NUMBER)

#(M=MODE -1=FRONT 1=BACK OF TOOL)

#(Q=TOLERANCE FOR RUNOUT)

#(R=MAX. RANGE FOR MEASUREMENT VALUES)

#(S=SPINDLE RPM)

#(U=ADDITIONAL RADIUS OFFSET)

#(W=ADDITIONAL LENGTH OFFSET)

#(Z=SAFETY POSITION IN Z WITH H0 IN MACHINE COORDINATES)

---