rotary axis positioning

[DaveR]

I'm trying to drill some selected arcs on a square solid, rotary axis is x, and the part is centered on the axis. I looked at the tutorial in the v9 4/5 axis book, and just followed that 1st example. Problem is that my posted code only outputs a-0 at the start , no rotations, all of the holes are drilled on one face.

 

Is there a switch in the post to be able to use this function?

[cadcam]

DaveR send me the file I will adjust it and send it back.

[DaveR]

Do you want to see my post or the part file?

[cadcam]

part file Dave

[cadcam]

DaveR I took your file and posted this with no trouble.

 

TA,1

%

O0001 (INDEX REV: )

(INDEX )

(MACHINE TOOL : FADAL FORMAT 1 )

(DATE -10-04-05 )

(TIME -09:00 )

(*)

(MATERIAL: )

(STOCK SIZE: X = 3. Y = 5. Z = 3. )

(HOME POSTION COORIDNATES ARE THE FOLLOWING)

(X= )

(Y= )

(Z= TOP OF PART)

(*)

( TOOL - 2 DIA. - .1563 5/32 DRILL )

(*)

(USING FIXTURE OFFSETS: E1 )

(*)

N100 G0 G17 G40 G49 G80 G90

N102 T2 M6 ( TOOL - 2 DIA. - .1563 5/32 DRILL )

N104 G0 G90 X-1.4897 Y1.812 A0. E1 S5867 M3

N106 G43 H2 Z4.

N108 G98 G81 X-1.4897 Y1.812 Z0. R.1 F8.45

N110 X-1.5304 Y.8997

N112 X-1.5043 Y-.0421

N114 X-1.4905 Y-.9978

N116 X-1.5101 Y-1.7405

N118 X-1.4779 Y-.4604 A90.

N120 X-1.4824 Y.9481

N122 X-1.5041 Y1.5589 A180.

N124 X-1.5098 Y.1708

N126 X-1.5374 Y-1.1505

N128 X-1.4436 Y.0143 A270.

N130 G80

N132 M5

N134 G0 G49 Z0.0

N136 A0.

N138 G0 X0. Y0. E0

N140 M0

N142 M2

( BECAUSE YOU HAVE A CHOICE - )

( THANK YOU FOR CHOOSING PRECISION PROGRAMMING )

%

 

What are you getting when you post know A out puts?

[DaveR]

%

N100 O0000 ( 0001 )

N102 ( CREATED ON 04-10-05 AT 9:13 AM )

N104 G20

N106 G0 G17 G40 G80 G90

N108 ( 5/32 DRILL TOOL - 2 DIA. OFF. - 2 LEN. - 2 DIA - .1563 )

N110 T2 M6

N112 M61

N114 A-0.

N116 M60

N118 G0 G90 S5867 M3 E1 X-1.4897 Y1.812

N120 H2 Z4.

N122 G81 G98 X-1.4897 Y1.812 Z0. R0.1 F8.45

N124 X-1.5304 Y.8997

N126 X-1.5043 Y-.0421

N128 X-1.4905 Y-.9978

N130 X-1.5101 Y-1.7405

N132 X-1.4779 Y-.4604

N134 X-1.4824 Y.9481

N136 X-1.5041 Y1.5589

N138 X-1.5098 Y.1708

N140 X-1.5374 Y-1.1505

N142 X-1.4436 Y.0143

N144 G80

N146 M5

N148 G90 H0 Z0.

N150 E0 X0 Y0

N152 M30

%

%

 

 

Thats what I get, I just get that a-0, no rotation? I'm using the MPFadal2 post

[cadcam]

Dave there is an issue with that post will look into it.

 

Check your mail, there is some there for you.

[DaveR]

Thanks Jay.