EuroTech WIth C axis and Subspindle

[LIGHTNING_]

Does anyone hade a good post for c-axis lathe. (eurotech) I tried the fanuc on but the c axis on this one is programmed different.

The way everything is programmed with this machine is that you write the program as if were a mill program and you double the x and make the y (the c).

So i'm looking for a post that can do this which than i can intergrate into my post.

Thanks

Bill

Raleigh, NC

[Guest CNC Apps Guy 1]

These settings are set in the post and are relatively easily changed if I read your question correctly. You can contact your local reseller and they shoudl be able to get you squared away fairly quickly.