Need help with a in house demo

[rc]

Hey Guys, I was wondering if anyone out there had a neat program for a upcoming open house we have coming up at our shop. We are going to have our machining center running for it and could use some help and or ideas. Maybe something that kids can relate to.

[BernieT]

Read this post and talk to these guys.

http://www.emastercam.com/cgi-bin/ultimate...ic&f=1&t=001186

Also this one.

http://www.emastercam.com/cgi-bin/ultimate...ic&f=1&t=001385

Happy machining!

[ 10-16-2001: Message edited by: BerTau ]

[Michael Reynolds]

I'd like to help if I can, also. I've done many demo's for our college. I will say that I could never get the head part to run correctly, but I may not have the facilities that you do. What I have run successfully are keychain givaways (posted on Jay's ftp site), and I have a hair dryer mold (boss) that I'd gladly email you if you want. If you want the dryer mold, email me and I'll reply with the file.

Hope this helps!!

Mike R.