AXYZ ughhhhh

[GRASSHOPPER]

Is anyone using an AXYZ router or have knowledge of an AXYZ router if so please respond or E-Mail me [email protected]

[Bill]

Joshua, if you are having post issues I would suggest calling your MasterCam dealer.

 

If you have a question about chaining (from your other post) please explain your problem better.

 

Hard to make heads or tails as to what your problem is.

[GRASSHOPPER]

Are you familiar with AXYZ?

[Bill]

quote:

---

I am seasoned with a thermwood but axyz not liking to much outside chain on arc is also issue besides the reverse chain issue

---

What does that mean?

 

If you want to know how to reverse a chain just ask. Easy not your english understand.

 

To reverse a chain click on the <--- ---> arrows in the selection mode of chain near the bottom of the pop up window.

[Bill]

No, but I know Mastercam. Wasn't sure what your question was.

 

They prefer post issues be resolved through the reseller. Some crooked folks ask for that stuff because they have illegal software and therefore do not have a reseller.

[GRASSHOPPER]

I do know how to reverse chain very simple problem is toolpath direction from master cam come's up in opposite direction in AXYZ's toolpath Are you familiar with AXYZ?

[GRASSHOPPER]

I have my post issue sorted out only minor tweaks in programming remain

[Bill]

Not familiar with routers but I would suggest posting a new topic without ugghhh.

 

Topic... Reversing chain toolpath (router)

 

And explain it like you just did. Be surprised how helpful folks will be if you are clear and polite.

 

The AXYZ post you initially put up, put a flag on your posts so folks may be skipping you.

 

Hope you can get it worked out.

[GRASSHOPPER]

thank you

good advice

[Bill]

You are welcome. Good luck.

[Jimmy Wakeford from Barefoot CNC]

The problem maybe that you are used to thermwoods coord system which is reverse from most machines. There is a switch that may help in post xmultiplier ? also I have used scalex to switch the coords around.

Are you trying to adapt your therm post for the axyz?