fadal pst. tapping question

[CAMMAN]

Dave,

i posted that tapping question and when I got to the part for format a question for user I used the find to look for Questions to ask user even look for FQ1 and so on with the fq 2,3,4,5 and there are no qestions to be asked in my FADAL POST where should i start to put new questions to ask user in the post and how should i put for a heading for the questions

thanks

john

[Allan Brown]

Format the question up at the top of your post, perhaps after the variable Initialization section.

I will restate my warning that you should be completely familiar with Mastercam's MP post language before you make any changes to your post.

I'll also restate that the 'Question' method is not necessarily the best for you situation. You may want to considered changing the typically empty "Misc 1" or "Misc 2" cycles to support your rigid tapping.

[This message has been edited by Dave Thomson (edited 09-13-2000).]