Learnig Mastercam

[Russell67]

Hey guys great forum. Lots of good info. I really need some help. I am trying to learn Lathe 9 SPI.

Is there anywhere in Ventura County that i can go to learn this(affortable)? Is there any good books(tutorials, examples, demo cd's)? The company i work for has there own cd's but i would like to load this at home so i can at least learn. I have already tried to get some knowledge from the poeple here at work but they all think i want to steal there job (rather get the knowledge and move on). I have a solid backround in with cad softwares. Any help is greatly appreciated. Thanks.

[Guest]

Welcome to the Forum Russell

 

 

Not being from CA, I can't tell you where to go for a class.

 

As far as books go, the ones offered on this site are great

 

Linky

[Joeyls319]

Welcome to the forum.

 

There's lots of knowledgable people here. I'm sure someone could answer any of your questions.

 

Joey

[BernieT]

Welcome to the forum !!

 

Where are you in Ventura County?? It's a big place.

 

quote:

---

Is there any good books(tutorials, examples, demo cd's)?

---

Do a search on the forum, lots of previous help on this topic. Look for books and CD's by Charles Davis and Mike Mattera.... Also check Ebay, lots of books and tutorials available.

[George A.]

Russell67

 

When I went thru mill training, I asked for and received (after alot of whining about the cost) a demo disk that I used at home. I figured that I had already paid for it with the $1750.00 cost for the class. It was version 9.1 and had mill, lathe & wire on it. You can't save or post but you can practice chaining, manipulating, etc.

 

Let the sparks fly

 

George

[cadcam]

Russell67 Call me in the office and I can set you up with the demo and were classes are along with are office.

 

805-375-7676 ask for Jay