posting problems

[Bill]

I have been having a hard time with this mpfadal2.pst. The machine will not run unless I edit these first couple of lines out plus if you notice I have a T1 followed three or so lines later with an H2. This will not work. After T2 further in the program an H3 shows up.

Another question for you post gurus what is up with the N110 (A-0)

This is the beta2 version but I would assume the post should be similar, although I cannot run mpfadal.pst

Any suggestions would be appreciated. Thanks in advance

%

N100O0000(83651TR1A)

(DATE=DD-MM-YY - 24-10-01 TIME=HH:MM - 14:43)

N102G20

N104G0G17G40G49G80G90H0E0Z0

N106( 1/16 FL_ EL TOOL - 1 DIA. OFF. - 21 LEN. - 2 DIA. - .0585)

N108T1M6

N110A-0

N112G0G90S5000M3E1X-.5584Y-.0914

N114H2Z.25

N116Z.1138

N118G1Z-.1362F20.

N120X-.5544F35

[KMaynard]

Bill,

I noticed the same thing.. I ended up doing the version 9 update to my fadal post from version 8 by running the UPTXT8.DLL c'hook..

Kev

[ 10-24-2001: Message edited by: KMaynard ]

[Bill]

I'll give it a whirl. Thanks