Post bug? Different output for the same operation type WTF!?

[Bruce Caulley]

I have 2 operations. One is an 11mm drill and is 4060.eia

 

The second is a 5.9mm drill, 4070.eia that drills the same positions as the 11mm only deeper. This is the output of 4060

 

code:

---

O0000 (4060)

(MASTERCAM - V10.)

(MC9 FILE - M:MANUFACTURING103249CNC_CAMVARIAXISHS08-FSS-SCR-014.MCX)

(MATERIAL - ALUMINUM MM - 2024)

(PROGRAM - 4060.EIA)

(DATE - OCT-26-05)

(TIME - 15:16)

(POST LIC - Ferra Engineering)

(T4 | 11MM DRILL | H0 | D0 | D11.0000mm | | DRILL/CBORE)

N10 G21

N20 G00 G17 G40 G94 G80

N30 G54.2 P0 (CANCEL DYNAMIC COMPENSATION)

N40 G61.1 (HIGH SPEED SETUP ON TOLERANCE= 0.01)

N50 G91 G28 Z0.

N60 G90 G53 X-630. Y-400.

N70 G91 G28 A0. C0.

N4

N80 G00 G90 G54 A-90. C-180.

N90 G54.2 P#100 Z150. (DYNAMIC COMPENSATION ON)

N100 S1210 X-171. Y17. M03

N110 Z150.

N120 G98 G81 Z70.532 R123. F360.

N130 G80

N140 G53 X-315. Y-700.

N150 A-90. C0.

N160 G54.2 P#100 X171.Y17.Z150.(DYNAMIC COMPENSATION ON)

N170 Z150.

N180 G98 G81 Z70.532 R123. F360.

N190 G80

N200 M05

N210 G54.2 P0 G53 Z0.0 (CANCEL DYNAMIC COMPENSATION)

N220 G64

N230 G91 G28 Z0.

N240 G28 X0. Y0.

N250 G28 A0. C0.

N260 G90

N270 M01

N280 M99

%

---

This is 4070

 

code:

---

 O0000 (4070)

(MASTERCAM - V10.)

(MC9 FILE - M:MANUFACTURING103249CNC_CAMVARIAXISHS08-FSS-SCR-014.MCX)

(MATERIAL - ALUMINUM MM - 2024)

(PROGRAM - 4070.EIA)

(DATE - OCT-26-05)

(TIME - 10:48)

(POST LIC - Ferra Engineering)

(T25 | 5.9 DRILL | H302 | D302 | D5.9000mm | | DRILL/CBORE)

N10 G21

N20 G00 G17 G40 G94 G80

N30 G54.2 P0 (CANCEL DYNAMIC COMPENSATION)

N40 G61.1 (HIGH SPEED SETUP ON TOLERANCE= 0.01)

N50 G91 G28 Z0.

N60 G90 G53 X-630. Y-400.

N70 G91 G28 A0. C0.

N25

N80 G00 G90 G54 A-90. C-180.

N90 S2050 X-171. Y17. M03

N100G54.2 P#100 Z150.(DYNAMIC COMPENSATION ON)

N110 Z150.

N120 G98 G81 Z55.532 R73.532 F400.

N130 G80

N140 G54.2 P0 G53 Z0.0 (CANCEL DYNAMIC COMPENSATION)

N150 G53 X-315. Y-700.

N160 A-90. C0.

N170G54.2 P#100 X171.Y17.Z150.(DYNAMIC COMPENSATION ON)

N180 Z150.

N190 G98 G81 Z55.532 R73.532 F400.

N200 G80

N210 M05

N220 G54.2 P0 G53 Z0.0 (CANCEL DYNAMIC COMPENSATION)

N230 G64

N240 G91 G28 Z0.

N250 G28 X0. Y0.

N260 G28 A0. C0.

N270 G90

N280 M01

N290 M99

%

---

The problem is line N90 and N100 in 4070. I made a change to the post so that the output in 4060 was correct, but no matter what I do this one operation is still outputting the code as if the post was not changed. Both ops are in the same machine group and I have done a restart on the pc all to no effect. Other drill operations in the file work ok.

 

Any ideas???

 

Bruce

[Bruce Caulley]

It is definately a bug. If I change the NC name to anything other than 4070 it works.

 

I will send it to QC

 

Bruce