sub program

[mario]

mastercam milling 8.1.1 I have a big problem with sub-program I try multiple post and the result is that

N1 CALL O1000

N2 CALL O1000

N3 CALL O1000

N4 CALL O1000

N5 CALL O1000

N6 CALL O1000

N7 CALL O1000

N8 CALL O1000

N9 CALL O1000

N10 CALL O1000

N11 CALL O1000

N12 CALL O1000

N13 CALL O1000

N14 CALL O1000

N15 CALL O1000

N16 CALL O1000

N17 CALL O1000

N18 CALL O1000

N19 CALL O1000

N20 CALL O1000

N21 CALL O1000

N22 G0 Z.25

N23 X-2.87 Y1.2486

N24 Z.093

N25 G1 Z-.014 F125.

N26 CALL O1000

N27 G0 Z.25

N28 X-2.87 Y1.2486

N29 Z.086

N30 G1 Z-.021 F12

the problem doesn't seem to be the post post

I can send my mc8 file !!

[ 11-01-2001: Message edited by: billy ]

[ 11-01-2001: Message edited by: billy ]

[mario]

this problem arrives when I make a transform

thank you very much everyone

[mario]

thank you thank you everybody

[Allan Brown]

Put the file on cadcam's FTP and post a link to the file here.

[ 11-02-2001: Message edited by: Dave Thomson ]

[mario]

I AM NOT ABLE THE PAGE DOES NOT OPEN ERROR MESSAGE i AM BEHIND A FIREWALL ???

[mario]

ftp://mastercam:[email protected]/Ma...um/MC8%20files/

sub program .ZIP

[mario]

if mastercam is not able to support sub program which software is very good for sub program

[Fred from Université de Sherbrooke]

Witch operations do you want to post?

You have a lot of posting OFF. I've posted all with a mpfan and everything is fine.

What is your post?

[Fred from Université de Sherbrooke]

And... you don't have any geometry in the Plexiglass's group. This way you can't regen your path.

[mario]

I tested with more post

and post only the transform (machining)

[mario]

I know for plexiglass

I dedicated is to give the complete file

[mario]

my day of works is now to finish but continues and I will take my

email Monday morning thank you very much FRED

[mario]

ok Fred ship me your nc file (result) please just take a look

[mcrae_andrew]

Use the MPMASTER post supplied somewhere on this website. It will work well with subs and the transform function. Post it out, Read'em and weap, cut the part, and have a nice weekend.

(Don't forget to regen eh FRED??)

Andrew

[mario]

take a look at the hook is in a good place transform operation parameters just over (work offset numbering) "" subprogram""

[Allan Brown]

The file is a bit of a mess. It would really help if people could boil their files down to only illustrate the issue at hand. I'm not even clear what you are trying to accomplish. Your one subprogram operation is a single step transform between points from X0Y0Z0 to X0Y0Z0.

If I delete everything else, move the transform op down, change some settings, modify the program number, ignore warnings about multiple identical tools numbers, etc., etc., it doesn't look bad. Really depends on what you are trying to accomplish. My file - MASTERCAM_DT.zip - is here. I would suggest that the problem is not with the posts, but on how you used Mastercam to achieve your goals for this part.

[ 11-05-2001: Message edited by: Dave Thomson ]

[mario]

OK Dave

I will put sort in my operation

I return to school

I contact Captech...

thank's

[ 11-05-2001: Message edited by: billy ]