modal in drawings

[Salt4cad]

Has any one figured out how to keep endpoint or center etc Modal when a picking end points arc, since the start of mastercam endpoint center was active until you selected something different? It seems cumbersome now to keep selecting end point center for every entity, I know about auto curser… It works good but in some instances picking a end point of a line one can pick a sketch point if you not close enough to the rear endpoint. Same instance in manually putting in circles or points.

With x you have to keep selecting Fast point every tine for a new location, in v9 you could put in x.25,.3 enter x.5, enter and so on with out re picking the fast point.