wire spline?

[[email protected]]

I am trying to create a 4 axis wirepath that has to follow a spline, X says that splines are not allowed. Is there a way to create an arc or curve to replace the spline? Any help would be greatly appreciated.

[HevyMetl]

I just opened the 4ax example file and modifed the geometry to add splines to the top of the part and had no problems or errors other than taper angle exceeds limits set by machine.

 

E-mail me the file or put it on the FTP and I will be glad to take a look at it.

[Guest]

go to the edit menu and select simplify

then select the splines you are wanting to convert, then enter, it should change the splines to arcs.

 

del