really need help!

[Fred from Université de Sherbrooke]

I have this surface to do and my head is starting the overheat!!! I think I have found the bottom line of my computer... He keep on crashing and crashing. Please if anybody could help... I have put it on the FTP in Mc8 files and it's called SURFACE_HELP. I wanted to put one coon surf on it. Thank's

[camguy]

FRED, Look in same folder for surface_help2. the best i could manage was to do it in 2 surfaces. you had way too much geometry to start with. some splines were only .0005" long, there were also some splines sticking out past the ends of the part. i ended up recreating all the splines because you had way too many control points on them, also most of the splines had small gaps between the end points. i don't know if the surfaces are what you want, but i would consider adding more geometry at the "fork" end of the part to give you more control over the shape.

hope this helps you out.

[Fred from Université de Sherbrooke]

Camguy! Thank's a undred times...

You've decreased my headache for today!

Thank's again