Backplot ?'s

[Kohler Joe]

When I backplot I always like to look at values in the lower left. Since using MR1 the values don't seem to jive with the screen positions. Example, my tool is at Z 0.0 but on the lower left it reads Z2.875. Anyone have anything like this? Also, when I step down using S key the tool seems to jump to next move.

[PBpaul]

Yep, I've got the same thing with the numbers not matching the graphic and there is another thread here somewhere that talks about that a little. I've emailed an example (and whine) to QC. You might want to do same. Also, Thad has another thread going about the "S" issue.

 

PBPaul

[Kohler Joe]

Thanks, will do.

[PBpaul]

Are there only a couple of us with this issue? I sent in my example to QC and they were able to reproduce it, BTW.

 

PBPaul