mphaas post processer

[sheldon]

hi,

when i post files at the start of the program it gives g28 and at the end it gives g28 camand i donot want that as my machine goes to home position.Can youall help me in editing the post.

 

thanks

[Kohler Joe]

Try putting # signs like below.

 

pretract #End of tool path, toolchange

sav_absinc = absinc

sav_coolant = coolant

coolant = zero

#cc_pos is reset in the toolchange here

cc_pos = zero

gcode = zero

pbld, n, sccomp, psub_end_mny, e

# pbld, n, scoolant, e

absinc = zero

# pbld, n, sgabsinc, "G49", pfzout, e

# absinc = one

# pbld, n, sgabsinc, sgcode, *sg28ref, "Z0.", scoolant, e

# pbld, n, *sg28ref, "X0.", "Y0.", protretinc, e

# absinc = sav_absinc

coolant = sav_coolant