Post Processor problem In mastercam x

[Hrubes]

We have a haas mill with a creative evolution controller. Running Mastercam X MR1

When I post any drill cycle the post is out of sequence.

 

See Below

 

 

N100 G81 X.2715 Y.3099 Z.1 P.1 Q-1. E.025 W.025 F4.5

N110 X-.9735 Y.3455 E.025 W.025

N120 X-.3236 Y-.3291 E.025 W.025

N130 G4 (PROGRAM NAME - MACHINE_GROUP_1 )

N140 G4 (DATE - 31-01-06 TIME - 08:29 )

N150 G4 ( NO. 7 DRILL TOOL - 1 DIA. OFF. - 0 LEN. - 0 DIA. - .201 )

N160 G4 T1 M6

N170 G40 T1

N180 G4 S1260 M3

N190 G0 X-.3236 Y-.3291

N200 G0 Z.1

N210 G4 M8

N220 G4 M5

N230 G4 M9

N240 G100 Z Y

N250 M30

 

 

N100 110 and 120 are above the program name.

Any Ideas

[dwsz71]

Hrubes,

 

check this topic here and see if it helps. Sounds like a similar problem. Remember to back-up your PST file before editting.

 

HTH

[Paul Decelles]

Set rpd_typ_v7$ to 0 in the post:

 

rpd_typ_v7$ : 0 #Use Version 7 style contour flags/processing?

[Hrubes]

Thanks Dave and Paul

 

Worked Great