tool & offset numbers

[Ashan]

I have notice all previous version of mastercam

When we take a tool from tool library

When assign tool numbers sequentially is on

Or when change a tool number

Always the tool number & length offset number & diameter offset number is comes

same as tool number

But now it never happens

I do not what the hell to set to do this ON version X

Please someone direct me what to do

Thanks

[Guest]

To set sequential tool numbers

 

Machine type >> control def >> operation defaults >> properties, system default mill >> tools check of sequential , now all your tools will come in in order.

 

To set T & H numbers

 

Machine type >> control def >> tools, set tool offset registers to add to tool 0 & 0

[Salahuddin]

Go to control def > click on tool > tool offset registers > add to tool > length 0 diameter 0

and it was coverd several times

[Ashan]

In

Control def

add to tool lengh 0 diameter 0

that I already have

still i found the tool number & offsets numbers are different

rearly it breaks my arss