Backplot 4-Axis in CIMCO

[babolino]

Hello all,

 

A costumer is asking me if the Backplot works with a 4-Axis Machine.

 

CIMCO should backplot the A-Axis:

 

N106 G00 G90 X5. Y-.829 A63.557 S25000 M03

N108 G00 Z101.25

N110 Z3.25

N112 G01 Z1.25 F200.

N114 Y0. A76.623 F2276.2

N116 A97.149 F3000.

N118 A116.664

N120 A137.19

N122 A156.679

N124 A177.205

N126 A197.731

N128 A218.256

N130 A237.764

N132 A257.281

N134 A277.808

N136 Y.04 A296.443

N138 Y.829 F152.7

N140 Z3.25 F500.

N142 G00 Z101.25

 

 

Thanky you for any comments.

 

king regards

 

Bob

[Garen Cakmak/CAP Tech.]

Yes Cimco edit V5 can backplot this ,not a problem.Just setup a machine with the A axis configuration.and you will be able to work with it.